Compac TJ 525 transmission jacks are ideal for the removal and fitting of gearboxes and automatic transmissions when the vehicle is supported by a hoist.
The head of the transmission jack can be adjusted from side to side by 60mm and has a tilt adjustment of 10 degrees up and 10 degrees down and comes with a chain and hook system to keep the job in place.
The jack is fitted with a foot pedal to raise the job leaving you with both hands free to position the gearbox correctly.
The lowering mechanism is spring loaded to make it easier to re install gearboxes by having more control over the jack as well avoiding the risk injuries.
The jack is fitted with an overload valve to prevent it being used beyond its rated capacity.
A wide wheel pattern that is offset make the jack stable while be able to access in between the drive on ramps of a scissor type hoist.
TJ 525
Capacity = 525 Kg
min height = 1170mm
Max height = 2020mm
Footprint = 595mm x 535mm
Weight 80Kg
The head of the transmission jack can be adjusted from side to side by 60mm and has a tilt adjustment of 10 degrees up and 10 degrees down and comes with a chain and hook system to keep the job in place.
The jack is fitted with a foot pedal to raise the job leaving you with both hands free to position the gearbox correctly.
The lowering mechanism is spring loaded to make it easier to re install gearboxes by having more control over the jack as well avoiding the risk injuries.
The jack is fitted with an overload valve to prevent it being used beyond its rated capacity.
A wide wheel pattern that is offset make the jack stable while be able to access in between the drive on ramps of a scissor type hoist.
TJ 525
Capacity = 525 Kg
min height = 1170mm
Max height = 2020mm
Footprint = 595mm x 535mm
Weight 80Kg