HiKOKI 18V Brushless Impact (Hammer) Driver Drill DV18DC(H4Z)
This product is an 18V cordless impact driver drill that is maximum torque of 140Nm with 13mm chuck.
Equipped with a 22-stage clutch and drill mode, it can be used wood drill, steel drill, steel cores drill, masonry drill and tightening screws of various sizes.
In addition, the drastically downsized, RFC-equipped, and improved side handle improve workability.
Features:
- Increased performance to a maximum torque of 140Nm makes heavy-load work much easier
- Due to the highly durable design that is resistant to heat generation, it is difficult to stop even during continuous work
- Reduce twisting of the driver drill with RFC (Reactive Force Control)
- The side handle can be mounted in 11 different positions to improve workability
Specifications: | |
---|---|
Voltage | 18 V |
Motor Type | Brushless |
Switch type | Trigger |
Drill chuck type | Keyless metal chuck |
Chuck capacity | 1.5 - 13 mm |
Light | LED White |
Clutch stages | 22 (Torque 1.5 - 8.0 Nm) |
Maximum Torque Hard Joint | 140 Nm |
Maximum Torque Soft Joint | 70 Nm |
No load speed - low | 0 - 500 rpm |
No load speed - high | 0 - 2000 rpm |
No load impact rate | 0 - 30,000 ipm |
Capacity: Brick & Masonry | 22 mm |
Capacity: Steel & Aluminium | 16 mm |
Capacity: Wood - hole saw | 102 mm |
Capacity: Wood - self feed bit | 80 mm |
Capacity: Small Machine Screw | M6 |
Capacity: Wood Screw | M12 x 100 mm |
Dimensions (L x W x H) | 190 x 267 x 89 mm |
Weight (with Battery) | 2.8 kg |