The Holemaker PRO 110 is an extra heavy duty, large capacity machine capable of producing burr-free holes up to 110mm diameter by 110mm depth. 1650w motor with 4-speed mechanical gearbox produces superb torque through gear reduction in low speeds. #4 morse taper spindle bore for use with taper shank drills, tapping head (M30 Capacity) and taper shank reamers.
Supplied complete with side mounted coolant system and arbor for use with 3/4"°ÃƒºÃ‚Â� shank Holemaker Cutters up to 75mm diameter and 75mm depth of cut. Optional arbor to take 1-1/4" shank cutters up to 110mm diameter and 110mm depth. 1L pressure feed coolant bottle available, recommended for use with large diameter and depth hole drilling.
 Large Holes WITH THE HOLEMAKER PRO 110
Holemaker Annular Cutters are available up to 75mm Diameter with a standard 3/4" weldon shank.
61mm to 150mm Diameter cutters are available with a 1-1/4" shank, to help increase the strength of the cutter.
The Holemaker Pro 110 is supplied standardly with #4 Morse Taper arbor for use with 3/4"°ÃƒºÃ‚Â� shank Holemaker Cutters up to 75mm diameter and 75mm depth of cut.
Alternatively The Pro 110 can be ordered with a number of different #4 Morse Taper arbors, depending on your specific job requirements. For a list of available #4 Morse Taper arbors please click here.
When drilling large diameter or deep holes with the Holemaker Pro 110, the optional 1100mL pressure feed coolant tank is highly beneficial.
The pressure feed tank will increase the coolant flow to the centre of the cut, and will also allow for larger cuts to be completed, without having to re-fill the coolant tank during the cutting process
SPECIFICATIONS | |
---|---|
Capacity (Diameter - max) | 110mm |
Capacity (Depth of Cut - max) | 110mm |
Capacity ( Twist Drills) Â | #4 Morse Taper 47mm |
Motor Input Power | 1800 Watt |
Motor Output Power | 1650 Watt |
Gearbox  | 4 Speed Heavy Duty 85/135/160/250RPM |
Magnet Dead Lift | 22000nm |
Weight | 31.0kg |
Â
Â