The automatic welding helmet is a new generation product for labor protection. Some new and high science and technology such as LCD, optoelectrics detection, solar power, microelectronics, etc are integrated into it. The automatic welding helmet not only can efficiently protect operator's eyes from injuries caused by arc, but also can make both hands free and strike arc accurately. Therefore, the quality of products and work efficiency may be raised considerably. It may be widely used for various welding, cutting, spraying and arc gouging, etc.

VEK automatic welding helmet is equipped with a filter set that can become dark. The filter is transparent before welding, so the operators may observe the work surface clearly. When striking arc, the filter darkens automatically immediately. When arc goes out, the filter will become transparent again. The switching time from light to dark is about 0.0001 second. The switching time from dark to light may be set up within 0.1-0.9 second. The mask is equipped with continuous darkness-adjusting unit, so the operator may select an arbitrary dark shade number ranging from No.9 to No.13.

VEK automatic welding gives the operators permanent complete protection against UV/IR even in transparent condition. The UV/IR protection level is up to DIN13 in all time. The power is provided by solar cells, so user is exempted from changing battery, turning on or off power and any other operation

VEK Welding Helmet Features
Made To Australian Standards
 Switching time 1/25000sec
Viewing area shades 92 X 42mm
Dark shade number 9-13 Stepless Adjustment
Light shade number 4
UV / IR Protection -Din 16
Suitable for stick, Mig & Tig
Adjustable reopening delay 0.5-0.8 sec
Adjustable sensitivity
Power supply: Replaceable Li-Mi & solar cell
Operating temperature -10å¼C-55å¼C

Filter dimensions 110 x 90 x 9mm
12 months warranty