| |
The Model 6201 is a hand-held portable appliance tester, performing four functions to ensure the Safety of ClassI, ClassII and ClassIII 240V appliances. And also can measure the mains voltage.
Readings are displayed on a large liquid crystal display (LCD) below which are three LEDs which unambiguously display a pass or fail indication for threshold values dic-tated by AS/NZS 3760
| |
| |
| |
| This instrument is suitable for performing tests as required by the following standards. | | AS/NZS 3760:2001 | In-service safety inspection and testing of electrical equipment | |
| | |
| | RPE
Protective Conductor Test | RINS
Insulation Resistance | Measuring
Range | 0~19.99Ω | Rating | 500V/200MΩ | 250V/200MΩ | Measuring
Range | 0~19.99/0~199.9MΩ
(2ranges auto) | Resolution of
Measurement | 10mΩ | Resolution of
Measurement | 10kΩ/100kΩ | Short Circuit
Current | 200~250mA DC | Output Voltage | 500V DC
(+20%/-10%)
@1MΩ | 250V DC
(+20%/-10%)
@1MΩ | Open Circuit
Voltage | |±5.0 ±0.4V DC | Current | 10mA DC or less | | Accuracy | |±(2%rdg
|+ 3dgt) | Accuracy | |±(2%rdg
|+3dgt) | VOLT
AC Voltmeter | | Measuring
Range | 180~260V
(50/60Hz) | Resolution of
Measurement | 1V | | Accuracy | |±(2%rdg
|+3dgt) | | | General | Supply Voltage | 207~264V | | Frequency | 50/60Hz±1% | | Dimension | 185 (L) × 167 (W) × 89 (D) mm | | Weight | 1kg | Applicable
Standards | IEC 61010-1 | CAT.III 300V, Pollution Degree2 | | IEC 61326-1 | EMC requirements | | Accessories | 7123(Power Cord (AU))
7129(Test Leads with Alligator Clip)
7101(Flat Test Bar)
7140(Adapter for Extension Cord)
Probe Case
Shoulder Strap
Instruction Manual | | |