Milwaukee M18FPP11A3503B 18V 5.0Ah Li-ion Cordless 11pce Combo Kit Power Pack Including Fuel
SKU
M18FPP11A3503B
In stock
$3,509.00
-
Includes
- M18FPD30 - 18V Brushless Hammer Drill/Driver
- M18FID30 - 18V 1/4" Hex Impact Driver
- M18FCS66-0 - 18V Brushless 184mm Circular Saw
- M18FMTIW2F12-0 - 18V Brushless Mid-Torque 1/2" (Friction Ring) Impact Wrench
- M18FAG125XPD-0 - 18V Brushless 125mm (5") Paddle Switch Angle Grinder
- M18FH-0 - 18V Brushless 3-Mode 26mm SDS+ Rotary Hammer
- M18FJS-0 - 18V Brushless D-Handle Jigsaw
- M18CSX2-0 - 18V Sawzall Brushless Reciprocating Saw
- M18TLED-0 - 18V LED Work Light
- M18FMT-0 - 18V Brushless Multi Tool
- M18WDV-0 - 18V 7.5L Wet/Dry Vacuum
- 3 x M18B5 - 18V 5.0Ah Batteries
- M12-18FC - 12/18V Rapid Charger
- Kitbag
M18FPD30 - 18V Brushless Hammer Drill/Driver
The M18 FUELâ„¢ 13mm Hammer Drill Driver delivers the capability to drill large holes at high speed into the densest materials. The cordless drill is a compact design and solution, featuring AutoStopâ„¢ Control Mode for Enhanced Safety. The POWERSTATEâ„¢ Brushless motor delivers the most power under load to complete 2-9/16" Self-Feed holes in dense woods for increased productivity. At only 175mm in length, it provides maximum access and maneuverability in tight spaces. The AutoStopâ„¢ Control Mode offers enhanced safety for the operator by preventing over-rotation in a bind-up. The REDLINK PLUSâ„¢ intelligence ensures maximum performance and protection from overloads, heating, and over-discharge whilst the all metal ratcheting chuck provides increased grip strength, durability, and corrosion resistance.
- POWERSTATEâ„¢ Brushless Motor delivers 158 Nm of Max Torque with 2,100 RPM and 33,000 BPM
- Redesigned trigger mechanism with improved fitment and smoother acceleration provides the ultimate trigger control
- Offers an enhanced safety control mode, AUTOSTOPâ„¢, preventing over-rotations in bind-up situations
- New M-Clutch design enables the tool to handle a wider range of torque settings with improved drilling and fastening performance
- PLATFORM: M18 FUELâ„¢
- TORQUE: 158 Nm
- RPM: 0 - 500 / 0 - 2,100
- BPM: 0 - 33,000
- CHUCK TYPE: 13mm Metal Chuck
- LENGTH: 175mm
- WEIGHT: 1.5kg
- WARRANTY: 5 Years
- Includes
- (1) Bit Holder
- (1) Side Handle
- (1) Belt Clip
M18FID30 - 18V 1/4" Hex Impact Driver
The M18 FUELâ„¢ 1/4" Hex Impact Driver features the POWERSTATEâ„¢ Brushless motor which delivers maximum power for a full range of capabilities to complete the widest variety of applications. Increase productivity on the jobsite with fast driving speed without sacrificing power or control. REDLINK PLUSâ„¢ intelligence delivers Ultimate Trigger Control by providing smooth acceleration for small fasteners to prevent stripping of screws or damaging of materials. Featuring 4-mode drive control provides users with greater control over output speed and power. Self-Tapping Screw Mode is designed to reduce walking when starting self-tapping screws as well as reduce overdriving, breaking, and stripping out screws. The new impact driver also features Tri-LED lighting, illuminating the area of work while eliminating shadows.
- Enhanced motor gives the M18FID3 0 - 4,400 IPM and 226 Nm of Max Torque
- Provides the user the ability to deliver power to more demanding applications back-to-back
- Enhanced motor delivers an improved 3,900 RPM when compared to previous generations
- Provides the user with increased range of speed to complete application fast and with minimal downtime
- Redesigned trigger mechanism with improved fitment and smoother acceleration
- Tri-LED lighting illuminating the area of work while eliminating shadows
- 4-Mode Drive Control provides users with greater control over the output speed and power
- PLATFORM: M18 FUELâ„¢
- TORQUE: 226 Nm
- IPM: 0 - 1,400 / 3,600 / 4,400 / 4,400
- RPM: 0 - 1,700 / 3,000 / 3,900 / 3,900
- CHUCK TYPE: 1/4" Hex
- DRIVE CONTROL: 4 - Mode
- LENGTH: 113.5mm
- WEIGHT: 1.0kg
- WARRANTY: 5 Years
- SINGLE HAND BIT INSERTION: Yes
- TRI-LED: Yes
- Includes
- (1) Bit Holder
- (1) Belt Clip
M18FCS66-0 - 18V Brushless 184mm Circular Saw
Designed for the carpenter, remodeler and general contractor, the M18 FUEL™ 184mm Circular Saw from Milwaukee® generates corded power, cuts faster and gives users up to 750 cuts per charge. The POWERSTATE™ Brushless Motor provides 5,800 RPM and higher speeds under load for corded cutting performance. REDLINK PLUS™ intelligence ensures maximum performance and protection from overload, overheating and over discharge. The M18 REDLITHIUM-ION HIGH OUTPUT™ 12.0 battery delivers unmatched run-time in all applications. All magnesium guards and shoe delivers extreme durability for jobsite conditions. A built-in rafter hook offers quick and easy storage and an electric brake stops the blade quickly after cuts are complete for maximum productivity.
- Integrated rafter hook for easy storage
- Integrated dust port on guard and included vac adaptor
- Magnesium shoe and guard for maximum durability
- Electric brake to stop blade after trigger is released
- Voltage: 18V
- RPM: 5,800 RPM
- Length: 419mm
- Weight: 5.9kg
- Arbor Size: 15.88mm (5/8")
- Maximum Bevel Capacity: 50 degrees
- Max Cutting Depth: 45 47.6mm
- Max Cutting Depth: 90 63.5mm
- Includes
- (1) M18 FUELâ„¢ 184mm Circular Saw (Tool Only) (M18FCS66-0)
- (1) Blade
- (1) Rip Fence
- (1) Wrench
M18FMTIW2F12-0 - 18V Brushless Mid-Torque 1/2" (Friction Ring) Impact Wrench
The M18 FUEL™ 1/2" Mid-Torque Impact Wrench with Friction Ring delivers access in tight spaces, up to 881 Nm of nut-busting torque, and maximum power to weight ratio. This battery-powered impact wrench weighs only 1.58 kg, makin it extremely versatile, capable of performing a wide variety of applications. A POWERSTATE™ Brushless Motor provides the power needed to quickly perform many tasks, such as removing large bolts or lug nuts. The MILWAUKEE® 1/2" Mid-Torque Impact Wrench with Friction Ring is only 152 mm in length, providing users access to stubborn fateners where larger impact wrenches cannot fit without needing to disassemble components to reach bolts. Tri-LEDs that surround the anvil to deliver the user brighter light with fewer shadows. 4-Mode DRIVE CONTROL offers enhanced precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, Auto Shut-Off Mode applies no more than 48 Nm of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Mode, where the tool delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. REDLINK™ PLUS Intelligence electronics make these controls possible while ensuring maximum performance, protecting the tool against overloads, over-heating, and over-discharge. The M18™ REDLITHIUM™-ION battery pack (not included) fits all M18™ tools, delivering more work per charge and more work over the life of the pack.
- Friction ring ensures quick and easy socket changes
- POWERSTATEâ„¢ Brushless Motor delivers up to 881 Nm of nut-busting torque
- 4-Mode DRIVE CONTROL provides control over output speed and power
- Auto Shut-Off Mode prevents over tightening and increases productivity by applying no more than 48 Nm of torque
- Bolt Removal Mode delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops
- 152 mm in length for maximum access in tight spaces
- Tri-LEDs deliver high definition lighting to increase workspace visibility with less shadows
- Works in up to 69kV environments
- REDLINKâ„¢ PLUS Intelligence ensures maximum performance and protects from overloads, heating and over-discharge
- PLATFORM: M18 FUELâ„¢
- ANVIL TYPE: 1/2" Square with Friction Ring
- NUT BUSTING TORQUE: 881 Nm
- FASTENING TORQUE: 746 Nm
- IPM: 0 – 900 / 0 – 2,100 / 0 – 3,100 / 0 – 3,100
- RPM: 0 – 1,250 / 0 – 1,950 / 0 – 2,575 / 0 – 2,575
- DRIVE CONTROL: 4-Mode with Auto Shut-Off Mode & Bolt Removal Mode
- LENGTH: 152 mm
- WEIGHT: 1.58 kg (Tool Only)
- WARRANTY: 5 Years
M18FAG125XPD-0 - 18V Brushless 125mm (5") Paddle Switch Angle Grinder
The M18 FUEL™ 125 mm (5") Angle Grinder with Deadman Paddle Switch is the next advancement in power and performance, fast cutting and a lighter and more compact design when compared to the current model. The POWERSTATE™ Brushless Motor delivers maximum sustained power and 8,500 RPM to remove material faster and increase productivity. REDLINK™ PLUS Intelligence ensures unmatched levels of performance, protection, and compatibility. The M18 FUEL™ 125 mm (5") Angle Grinder with Deadman Paddle Switch includes an electronic clutch for kickback protection, as well as overload protection to maximise motor life. With tool-free accessory and guard adjustments, users will experience fast accessory changes, and less downtime, while remaining fully compatible with the most common accessories in the market. The MILWAUKEE® M18 FUEL™ 125 mm (5") Angle Grinder with Deadman Paddle Switch takes cordless grinders to the next level.
- Next generation M18CAG125XPD with electronic and ergonomic upgrade
- More compact, lightweight and balanced design allow for more comfortable and manoeuvrable use
- POWERSTATEâ„¢ Brushless Motor provides 8,500 RPM
- REDLINKâ„¢ PLUS Electronic Intelligence enables advanced communication between your batteries and tools, allowing for unmatched levels of performance, protection, and productivity
- E-Clutch with kickback protection
- Paddle switch design provides increased comfort and ease-of-use in various positions
- Includes 125 mm (5") Type 27 Guard and Type 1 Clip-On Guard
- PLATFORM: M18 FUELâ„¢
- NO LOAD RPM: 8,500
- VIBRATION REDUCTION: Anti-vibration Handle
- SPINDLE SIZE: M14
- TOOL FREE GUARD: Yes
- WHEEL DIAMETER: 125 mm (5")
- SWITCH TYPE: Paddle Switch, No-Lock
- Includes
- (1) Anti-Vibration Side Handle
- (1) 125 mm (5") Type 27 Guard
- (1) Type 1 Clip-On Guard
- (1) Backing Flange
- (1) Spanner Wrench
- (2) Vent Clips
M18FH-0 - 18V Brushless 3-Mode 26mm SDS+ Rotary Hammer
The M18 FUEL™ 26 mm SDS Plus Rotary Hammer delivers fast drilling, hard-hitting performance and maximum control for productivity on the jobsite. Designed to achieve top performance with only moderate pressure, the rotary hammer is compatible with all M18™ REDLITHIUM™-ION batteries and is optimised for use with M18™ REDLITHIUM™-ION HIGH OUTPUT™ 6.0Ah batteries (sold separately). The POWERSTATE™ Brushless Motor delivers users 2.7 J of impact energy, 1,330 RPM, and 4,800 BPM, providing speed and power in the most demanding applications. REDLINK™ PLUS Intelligence tool technology ensures maximum rotary drill performance and protects the tool from overload, overheating, and over-discharge. The MILWAUKEE® M18 FUEL™ 26 mm SDS Plus Rotary Hammer includes AUTOSTOP™ Kickback Control for maximum control and enhanced safety, with the tool sensing a bind-up situation when users are drilling in rebar or hard aggregate and stopping over-rotation, without the need for the user to release the trigger, indicated by the AUTOSTOP™ Indicator LED. The Anti-Vibration System (AVS) minimises vibration for maximum comfort when in use for extended periods. A Dedicated Dust Extractor (M18FDEX) is also available (sold separately), which once connected is powered by the Rotary Hammer.
- 3 mode (Rotary Hammer, Hammer Only, and Rotary Only)
- POWERSTATEâ„¢ Brushless Motor delivers fast drilling
- 2.7 J impact energy for hard hitting performance
- Anti-Vibration System (AVS) for maximum user comfort
- AUTOSTOPâ„¢ Kickback Control senses bind-up and prevents over-rotation
- REDLINKâ„¢ PLUS Intelligence integrates full-circle communication between tool, battery and charger to protect from overloads, over-heating and over-discharge
- Integrated LED light for illuminating dark workspaces
- Compatible with M18 FUELâ„¢HAMMERVACâ„¢ 26 mm Dedicated Dust Extractor (M18FDEX)
- Adjustable depth gauge rod for accurate hole depths
- PLATFORM: M18 FUELâ„¢
- MAX RPM: 1,330
- BPM: 4,800
- IMPACT ENERGY: 2.7 J
- VIBRATION REDUCTION: Yes
- DRILL CAPACITY: 26 mm (1")
- LENGTH: 296 mm
- WEIGHT: 3.1 kg
- WARRANTY - TOOL: 5 Years
- Includes: (1) Side Handle with Depth Gauge
M18FJS-0 - 18V Brushless D-Handle Jigsaw
The M18 FUEL D-Handle Jigsaw combines power, blade speed and precision, to deliver quality cuts in a wide variety of materials and applications. Equipped with Milwaukee’s POWERSTATE Brushless Motor and REDLINK PLUS Intelligence, the M18 FUEL D-Handle Jigsaw provides high blade speed at 3500 strokes per minute, minimising chipping or bucking for clean controlled cuts. With the M18 REDLITHIUM-ION 5.0Ah battery, the saw is capable of cutting up to 35m of 19mm laminated particle board, delivering all-day productivity with less trips to the charger. The M18 FUEL D-Handle Jigsaw features a variable-speed two-finger trigger, toolless blade-change and bevel adjust, and an integrated LED light with on/off blower to maximise cutline visibility
- 4-Position orbital cutting provides versatility for application-specific cutting
- On/Off cut line blower keeps the cut line clear of debris, and allows user to turn off blower when using dust extraction
- Accepts T-shank jigsaw blades
- Toolless shoe bevel with positive stops allows for quick and accurate shoe adjustment
- Includes non-marring shoe cover for protection of finished surfaces
- Voltage: 18V
- Length: 226mm
- Weight: 2.2kg
- Stroke Length: 25mm 1 Inch
- Blade: T-Shank
- SPM: 0-3,500
- Tool Free Bevel: Detents at 0,15,30,45 degrees
- Includes
- (1) Anti-Splinter Guard
- (1) Dust Collection Tube
- (1) Dust Cover
- (1) General Purpose jigsaw blade
- (1) Hex Wrench
- (1) Shoe Guard
M18CSX2-0 - 18V Sawzall Brushless Reciprocating Saw
The M18 FUELâ„¢ SAWZALLâ„¢ Reciprocating Saw is the next generation of legendary performance and durability, designed for the toughest applications on the job site. The M18 FUELâ„¢ SAWZALLâ„¢ delivers fast cuts, as it leverages a POWERSTATEâ„¢ Brushless Motor to provide users with 3,000 SPM and 32 mm (1-1/4") stroke length for fast material removal. REDLINKâ„¢ PLUS Intelligence ensures maximum performance under stress, as well as protection from overloading, overheating, and over-discharging. The M18â„¢ REDLITHIUMâ„¢-ION 5.0Ah Battery Pack (not included) delivers users runtime and provides more work per charge and more work over the life of the battery pack. The M18 FUELâ„¢ SAWZALLâ„¢ Reciprocating Saw is designed to perform in demanding applications and is Milwaukee's most durable cordless reciprocating saw yet. A tool-free, wear-resistant blade change reduces downtime on the job, and an anti-corrosion blade clamp and metal reinforced battery rails provide long component life, standing up to tough jobsite conditions. The M18 FUELâ„¢ SAWZALLâ„¢ Reciprocating Saw weighs less than the previous generation and features an adjustable shoe, integrated LED light, and a hanging hook for convenient storage on the job.
- POWERSTATEâ„¢ Brushless Motor provides fast cutting speed and power through tough applications
- Anti-corrosion blade clamp delivers durability with less downtime due to corrosion
- Metal reinforced battery connection provides improved durability and battery retention over life of the tool
- Built-in LED light illuminates work surface while cutting
- Lever action QUIK-LOKâ„¢ blade clamp provides fast, easy blade changes
- REDLINKâ„¢ PLUS Intelligence provides optimised performance and overload protection
- Adjustable shoe
- Hang hook
- PLATFORM: M18â„¢
- VOLTAGE: 18V
- SPM: 0 - 3,000
- LED LIGHT: Yes
- BLADE CLAMP: QUIK-LOKâ„¢ Universal
- KEYLESS ADJUSTABLE SHOE: Yes
- STROKE LENGTH: 32 mm (1-1/4")
- HANG HOOK: Yes
- KEYLESS BLADE CLAMP: Yes
- LENGTH: 434 mm
- WEIGHT: 3.1 kg (Tool Only)
- WARRANTY: 5 Years
- Includes: (1) 200 mm (8") 8/12 TPI Multi-Material Blade (48005093)
M18TLED-0 - 18V LED Work Light
- Durable Sealed Aluminium Head
- 90° Rotating Head for flexible focused illumination.
- Intergrated Hook for hands free work
- 5 year warranty
- Voltage: 18V DC
- Light Type: LED
- Lumen: 99 lm
- Hands Free: Integrated Hook
- Head Rotation: 90°
- Battery Type: REDLITHIUMâ„¢
- Weight (Tool only): 0.32 kg
- Weight (with 2.0Ah): 0.74 kg
M18FMT-0 - 18V Brushless Multi Tool
- POWERSTATEâ„¢ Brushless Motor, combined with 10,000 to 20,000 OPM delivers fast cut speed
- REDLINKâ„¢ PLUS Intelligence enables communication between tool and batteries, allowing for optimal levels of performance, protection, and compatibility
- Auto-Load feature allows user to start precise cuts slowly, and automatically ramp up to the highest speed under load
- Variable Speed Dial with 10 settings for adjusting speed to application
- Vibration dampening technology for low full tool vibration
- 4.2° oscillation angle
- 180° span LED for visibility in low-light situations
- Tool-free blade change for fast accessory changes
- WARRANTY: 5 Years
- WEIGHT: 1.2 kg (Tool Only)
- LENGTH: 310 mm
- OPM: 10,000 - 20,000
- PLATFORM: M18 FUELâ„¢
- SPEED SETTINGS: 10
- OSCILLATION ANGLE: 4.2°
- Includes
- (5) Sanding Sheets
- (1) Sanding Pad
- (1) Wood Cutting Blade
- (1) Blade Adapter
- (1) Depth Stop
- (1) Dust Extraction
- (1) Accessory Box
M18WDV-0 - 18V 7.5L Wet/Dry Vacuum
The M18™ 7.5L Wet/Dry Vacuum offers powerful suction for wet and dry applications. Compatable on all Milwaukee® M18™ REDLITHIUM-ION™ battery packs, the M18WDV-0 offers long continuous run time and high air power and suction to provide quick and easy removal of dust, debris and water. A HEPA filter delivers excellent fine dust collection for dry applications. The stackable toolbox design, on-board hose and accessory storage offer excellent portability and convenience, a built-in blower port allows the vacuum to double as a blower, and the 31.8mm inlet allows standard vacuum attachments to be fastened. It includes vacuum, filter, hose, a crevice tool, hose clip adapter and a wide nozzle.
- Powerful suction for wet and dry applications
- Quick and easy clean up for wood/metal shavings, drywall dust and other large area jobsite debris
- Organised and enclosed on-board storage
- Stackable tool box design
- Inlet Diameter - 31.8mm (1-1/4�)
- Voltage: 18V
- Length: 421mm
- Weight: 4.7kg
- Max Air Flow: 1,274 L/min (45 CFM)
- Sealed Suction in Water: 813mm (32�) H²O Lift
- Includes
- (1) M18â„¢ 7.5 Litre Wet/Dry Vacuum (Tool Only) (M18WDV-0)
- (1) 1.8m Hose
- (1) Crevice Tool
- (1) Utility Nozzle
- (1) Hose Clip Adapter
- (1) HEPA Filter
| Bonus Type | Redemption |
|---|---|
| Bonus Description | Bonus Redeem 3 x 18v 5ah Battery Valued @ $559!!!... |
| Bonus Start Date | 1 Oct 2023 |
| Bonus End Date | 31 Dec 2023 |
| Video |
Write Your Own Review
Website Search...
- Located on the top of every page of website in between VEK TOOLS Logo & Website phone number
- For best results try to use key words for what you are looking for
- Sometimes too many words will reduce the chance of finding what your looking for
- Spelling errors will reduce the chance of finding what your looking for
- Once selection has been searched you can refine your search from left hand menu
Website Chat...
- Located on bottom right of website page
- This is run by real VEK TOOLS Staff so please be patient as they could be managing 2-10 chats at the same time
- This is service is not for tool diagrams or spare parts, contact via email prestons@vektools.com.au your request
- Remember if you don't give us details to contact you back on we can't get back to you
Stock Levels...
- Stock levels are not listed on website
- We also use supplier warehouses to dispatch orders to speed up delivery or save on costs when customer isn't in Sydney
- If out of stock we also search between supplier warehouses & also other distributor stores to fill orders
In Store Pick Up...
- If you don't want to pay for delivery or need your item/s ASAP, you can select pick up in store option in check out. Just bear in mind not all stores will have everything in stock & your order might need to be transferred from another store or supplier. Nominated store will contact you once order is in & ready for pick up.
- For urgent pick ups please call 02 9756 3464 to confirm store stocks & ensure order is processed as a priority order
Order Processing...
- Our online team will usually have your order processed within the next 2-4hours(During Business Hours)
- Once order is processed we will send an update through the online portal updating rough delivery times.Please ensure you check your spam or junk mail folders as with current filters sometimes order update emails are blocked or filed into those folders
- Orders placed before 1pm during working days will usually be dispatched by the 3pm pick up
- For urgent orders please don't hesitate to contact us on 02 9756 3464 so we can try make sure order is able to cover your expectations
Shipping...
- Unlike others we try run a flat rate service for our online orders, most times this is achievable & on occasions it can't be we will notify the best possible rate so you can choose whether you would like to proceed or if you would like to organise your own freight or if you would like to cancel your order. Refunds will be processed immediately.
- For items under 1kg & could fit in a shoe box size box you may select $10 local sydney metro freight rate even if your not in that location
LOCAL SYDNEY METRO
- For Sydney metro areas we offer flat rate of $10, some occasions to which this might not count is items longer that 1.2m or heavier than 20kgs. In these scenarios we will get in contact with you via phone or email before proceeding with order
- Includes the City of Sydney, Waverley, Randwick, Canada Bay, Inner West, Bayside and Woollahra local government areas. It is capped by Hornsby at the north, the Sutherland Shire at the bottom, but does not include areas like the Blue Mountains,Riverina,Illawarra,Shoalhaven, Riverina,Hunter,New England,North Coast, or the Central Coast.
OUT OF SYDNEY METRO
- For Areas outside the above region we offer a flat rate of $20, some occasions to which this might not count is items longer that 1.2m or heavier than 20kgs. In these scenarios we will get in contact with you via phone or email before proceeding with order
Estimated Delivery Times...
- Orders placed before 1pm on a business day will be processed within 1-3 hours. In the unusual event of a delay to the despatch of your order you will be contacted as soon as possible.
- Once the order has been despatched the estimated delivery time is as follows:
Sydney Metro 1-2 business days
QLD,VIC,SA Metro 2-4 business days
NT,WA,TAS Metro 3-6 business days
Regional Areas 3-8 business days
Remote Areas 6-10 business days
*Please note that these estimated delivery times are estimates and are not guaranteed
Order Tracking...
- Once order has left our warehouse tracking will usually come through to you mobile or email address
- Direct Warehouse shipments might be delayed as we are relying on supplier warehouse to notify us
Can power tools be purchased from other countries?
- Not recomended as the tool certification varies between different countries & in Australia tools require an Australian Compliance Approval number.
- In Australia tools must be 240v power compliance.
- Purchasing tools overseas will void your tool‘s warranty in Australia.
Can I plug my tool into a generator?
- Yes you can.
- Ensure that the generators constant out put is at least 30% more than the power tool you are running off it
- If running more than one tool make sure combined tool wattage is less than the constant out put of the generator by at least 30%
Can power tools be purchased from other countries?
- Not recomended as the tool certification varies between different countries & in Australia tools require an Australian Compliance Approval number.
- Purchasing tools overseas will void your tool‘s warranty in Australia.
- Tools from overseas can not be claimed on tax or depreciated over three years as they are not incurring GST
- In then event of injury caused by tool your public liabilty insurance policy will be void.
What can I do to maintain my power tool?
- Keep the tool relatively clean and free from debris.
- Try to use a blow gun to blast any dust and fragments from the unit occasionaly.
- Regularly check the carbon brushes if your tool has brushes, there are now tools that run on brushless technology Carbon brushes are a component in all power tools that wear with use, and should be replaced when they wear down to a marked point
- Both carbon brushes should be replaced at the same time, and should be identical. Once they are replaced, run the tool with no load for 1 minute to ‘break in’ the brushes. Use accessories that are sharp & of a high quality grade to avoid extra load on tool.
- Select the correct gear for the application to releave overloading tool.
- Let the tool do the work without extra force.
What’s that burning smell?
- If you encounter a burning smell when using a power tool of any sort, it means that the motor is being over loaded and is overheating. Specifically, the motor’s internal fan (air radiator) can’t cool the motor’s windings fast enough and their varnish coating begins to melt & burn. If you start to smell this ‘electrical burning smell’, withdraw the machine from the work but keep it running. This will enable the impeller fan to cool the motor’s windings.This smell is generally an indication that the tool isn’t being used correctly, or that it is attempting to perform a task that it isn’t capable of.
- If this does occur & performance of the tool has changed please ensure you get the tool to our inhouse service department to completely check before more damage is caused.
How can I ensure I don’t overload my power tool?
- Use the right tool for the job
- Using one or more pilot drills
- Taking smaller cuts and multiple passes over the material
- Using cutting and cooling lubricants
- Using quality, sharp accessories
- Slowing down the speed or changing to a lower gear
- Letting the power tool do the work and not forcing it
- Regularly clearing wood chips, debris & swarf
My power tool isn’t functioning properly, what do I do?
- If your tool is still under its warranty, then all you have to do is to take it back to our inhouse service department with your proof of purchase (Tax invoice), and we will assess it and give you a solution.
- If it is not under warranty, then you can take it to a local service agent or our inhouse service department and they will give you a quote to repair it.
I have lost my power tool’s instruction manual. Where can I get a replacement?
- Most suppliers will have a library of instruction manuals on their website available for you to download.
- If you find these are not available online, call the manufacturer as they will have them.
If for some reason your not sure please always check instruction manual of tool or contact your nearest store for advice & assistance.
How do I get the best run time & life out of my cordless tools?
- Always keep the battery’s contacts/terminals clean and from coming into contact with metal or moisture
- Store the batteries in a cool, dry place & dont leave in sun for long periods(eg, on metal roof or rear of ute/truck)
- Use accessories that are sharp & of a high quality grade to avoid extra load on cordless tool
- Select the correct gear for the application to releave over current draw on batteries
- Let the tool do the work without extra force
- On Cordless Drills when tightening the chuck always use hand not machine to close the jaws
Can I use a different battery in my cordless tool?
- Most cordless tool will only be able to operate off a single voltage, there are some tools that will run dual voltage please check your instruction manual before you attempt or call our customer service to check
- Some Cordless tools can run on batteries with different capacities (amp-hour values). Note: if your tools are made to run on 3ah they might not run on a 1.5ah battery or it might prematurely wear the 1.5ah battery
- Some manufacturers/brands do not change their style of battery fitment & are reverse compatible between battery chemistries (eg a Li-ion battery may be able to be fitted to a NiCd tool). If this is the case with your cordless tool, ensure your charger can charge the both battery types of chemistry.
How long will a battery’s charge last?
- This will vary on many factors such as:the condition of the battery, the battery’s voltage & Amp Hour, speed ratings of the tool, the tool’s gearing, the application, the tools accessory and the efficiency of the cordless tool.
- A good test is when you buy a new tool to fully charge the battery & time how long it takes to fully drain, so in the future you will be able to compare condition of battery to your test results
Can I leave my batteries on the charger when I’m not using them?
- This isn’t a good idea & could harm the battery or charger.
- On some charges it will overcharge the batteries after the nominal charging time has expired.
- Always charge the batteries in a safe enviroment away from the chances of being bumped or dropped whilst charging
Can cordless tools be purchased from other countries?
- Not recomended as the tool certification varies between different countries & in Australia tools require an Australian Compliance Approval number.
- Purchasing tools overseas will void your tool‘s warranty in Australia.
- Tools from overseas can not be claimed on tax or depreciated over three years as they are not incurring GST
- In then event of injury caused by tool your public liabilty insurance policy will be void
Can I plug my charger into a generator?
- Tool battery chargers should not be plugged into a generator.
- If you have to make sure the generator is an Invertor Generator or Single Sign Wave Generator
- There are some chargers available that can handle the surges in voltage and current that generators produce – If this is the case it will be specified by the charger’s manufacturer in the manual.
What can I do to maintain my cordless tool?
- Keep the tool relatively clean and free from debris.
- Try to use a blow gun to blast any dust and fragments from the unit occasionaly.
- Regularly check the carbon brushes if your tool has brushes, there are now tools that run on brushless technology Carbon brushes are a component in all power tools that wear with use, and should be replaced when they wear down to a marked point
- Both carbon brushes should be replaced at the same time, and should be identical. Once they are replaced, run the tool with no load for 1 minute to ‘break in’ the brushes.
- Use accessories that are sharp & of a high quality grade to avoid extra load on cordless tool
- Select the correct gear for the application to releave over current draw on batteries
- Let the tool do the work without extra force
What’s that burning smell?
- If you encounter a burning smell when using a power tool of any sort, it means that the motor is being over loaded and is overheating. Specifically, the motor’s internal fan (air radiator) can’t cool the motor’s windings fast enough and their varnish coating begins to melt & burn. If you start to smell this ‘electrical burning smell’, withdraw the machine from the work but keep it running. This will enable the impeller fan to cool the motor’s windings.
- This smell is generally an indication that the tool isn’t being used correctly, or that it is attempting to perform a task that it isn’t capable of.
- If this does occur & performance of the tool has changed please ensure you get the tool to our inhouse service department to completely check before more damage is caused
How can I ensure I don’t overload my cordless tool?
- Using one or more pilot drills
- Taking smaller cuts and multiple passes over the material
- Using cutting and cooling lubricants
- Using quality, sharp accessories
- Slowing down the speed or changing to a lower gear
- Letting the drill do the work and not forcing it
- Regularly clearing wood chips, debris & swarf
My cordless tool isn’t functioning properly, what do I do?
- If your tool is still under its warranty, then all you have to do is to take it back to our inhouse service department with your proof of purchase (Tax invoice), and we will assess it and give you a solution.
- If it is not under warranty, then you can take it to a local service agent or our inhouse service department and they will give you a quote to repair it.
I have lost my cordless tool’s instruction manual. Where can I get a replacement?
- Most suppliers will have a library of instruction manuals on their website available for you to download.
- If you find these are not available online, call the manufacturer as they will have them
If for some reason your not sure please always check instruction manual of tool or contact your nearest store for advice & assistance.
Which types of tools use compressed air?
The most common air tools are paint sprayers, air wrenches, air sanders, nail guns and air drills.
What are the advantages of using air tools?
- Air tools provide a lot more force than power tools driven by electric motors.
- Air tools have fewer moving parts and no electric motor to wear out making them more durable than power tools or cordless tools.
- Air tools can be used where tools creating spark can't such as service stations or other areas with highly flammable product enviroments
- Their durability and simplicity make them ideal for extended use in large-scale construction projects and in commercial factory work applications.
What extra equipment do I need to use air tools?
- To operate air tools, you will need a compressed air source, filtration and safety gear.
- Ensure that air compressor has a filter & air regulator
- Always wear goggles and any other safety gear specified by the air tool and air compressor safety instructions.
What can I do to maintain my air tool?
- Run the air tool at the right pressure
- Always have a clean air source by having the appropriate filtration to remove water from air lines
- Oil air tools regurlarly with quality air tool oil as per instruction manual of tool
- Use accessories that are sharp & of a high quality grade to avoid extra load on the air tool
How much air pressure is needed to operate an air tool?
- Most air tools will need at least 70psi (pounds per square inch) to operate.
- Most air tools will have markings or stickers on tool to stipulate max pressure
- Always check the instructions that come with your air tools and adjust the air compressor to fit the specifications.
I have lost my air tool’s instruction manual. Where can I get a replacement?
- Most suppliers will have a library of instruction manuals on their website available for you to download.
- If you find these are not available online, call the manufacturer as they will have them
If for some reason your not sure please always check instruction manual of tool or contact your nearest store for advice & assistance.
