RedBack Lasers MR706 machine mounted receiver with magnetic mount. The MR706 is designed to work with most red rotating laser levels it features magnetic mounting on a machine boom or blade/bucket. The MR706 features 360 degrees of reception and can pick up a laser anywhere within its massive 250mm reception window, when laser moves out of this reception window the receiver will flash slowly indicating the laser height the laser was last detected. On the receiver are 5 extremely bright clusters of LED lights indicating the height of the laser both above and below level as well as on level. The RedBack Lasers MR706 has an internal Ni-mh battery that can be charged with the included mains charging unit and can operate on a 12 or 24V system with the included cable with crocodile clips. Note though on a 12V system the receiver will still need a mains charge from time to time as the 12V system will only top up the internal battery not fully charge it.
Machine receivers are ideal for all types of earth moving and ground works, excavating for level and grades and can be installed on a number of machines.
Features
- 360 Degree Sensors for all round reception
- Large 250mm Reception Window
- Laser Received Height Flash Indicator
- Fine and Coarse Accuracy settings (3-5mm to 5-25mm)
- IP66 water and dust tight
- Internal Ni-Mh battery and Mains Charger, cable for 12V and 24V operation.
- Operates with Red Beam Rotating Lasers.
- Two Year Warranty