SET-XP® is a 1:1 two-component, high-solids, epoxy-based anchoring adhesive formulated for optimum performance in both cracked and uncracked concrete. SET-XP® adhesive has been rigorously tested in accordance with ICC-ES AC308 and 2009 IBC requirements and has proven to offer increased reliability in the most adverse conditions, including performance in cracked concrete under static and seismic loading. SET-XP® adhesive is teal in color in order to be identified as a highperformance adhesive for adverse conditions. Resin and hardener are dispensed and mixed simultaneously through the mixing nozzle. SET-XP® adhesive exceeds the ASTM C881 specification for Type I and Type IV, Grade 3, Class C epoxy.
USES-
- Threaded rod anchoring in cracked and non-cracked concrete
- Rebar dowelling in cracked and non-cracked concrete
- Bonding hardened concrete to hardened concrete
- Pick-proof sealant around doors, windows and fixtures
- Paste-over for crack injection
APPLICATIONS-Surfaces to receive epoxy must be clean. The base-material temperature must be 10ºC or above at the time of installation. For best results, material should be 20–26ºC at the time of application. Cartridges should not be immersed in water to facilitate warming. To warm cold material, the cartridges should be stored in a warm, uniformly-heated area or storage container for a sufficient time to allow epoxy to warm completely. Mixed material in nozzle can harden in 5–7 minutes at a temperature of 5ºC or above
STORAGE-For best results, store between 7°C – 32°C. To store partially used cartridges, leave hardened nozzle in place. To re-use, attach new nozzle.
CLEAN UP- Uncured material — Wipe up with cotton cloths. If desired scrub area with abrasive, waterbased cleaner and flush with water. If approved, solvents such as ketones (MEK, acetone, etc.), lacquer thinner, or adhesive remover can be used. DO NOT USE SOLVENTS TO CLEAN ADHESIVE FROM SKIN. Take appropriate precautions when handling flammable solvents. Solvents may damage surfaces to which they are applied. Cured material: Chip or grind off surface.
SHELF LIFE- 24months
EQUIVALANT TO: Ramset Reo 502,Ramset EPCONC8 Xtrem,Hilti RE500