The most powerful iron remover in our range literally dissolves contaminants, causing them to bleed purple out of the surface! This pH-balanced formulation is safe for use on aluminium wheels and car paint surfaces, and has been formulated for minimal odour.
How to use the product
1. Wash off any dirt or mud beforehand. Shake well, turn the nozzle to ‘ON’ and spray around over the whole wheel from around 10 cm away.
2. Allow to dwell for 2 or 3 minutes. The transparent liquid will react with contaminated areas, and become purple.
3. Agitate with a long soft brush to remove deeply embedded contamination.
4. Rinse thoroughly with plenty of water, until no more purple or bubbles come out.
5. Wipe down with a clean towel, and test brakes at low speed before driving.
2. Allow to dwell for 2 or 3 minutes. The transparent liquid will react with contaminated areas, and become purple.
3. Agitate with a long soft brush to remove deeply embedded contamination.
4. Rinse thoroughly with plenty of water, until no more purple or bubbles come out.
5. Wipe down with a clean towel, and test brakes at low speed before driving.