The automatic welding mask is a new generation product for labor protection. New technology such as LCD, optoelectronics detection, solar power, microelectronics, amongst other, are integrated into it. The automatic welding mask not only can efficiently protect the operators eyes from injuries caused by arc, but also can make both hands free to strike arc accurately.
Therefore, the quality of products and work efficiency may be raised considerably. Can be used for various welding, cutting, spraying and arc gouging, etc.
Results are enhanced weld quality, increased efficiency, and improved safety because the users can see more.
The Pro400 and MAX Pro800 are equipped with a filter set that can auto darken. The filter is transparent before welding, so the operators may observe the work surface clearly. When striking arc, the filter darkens automatically and immediately. When the arc goes out, the filter becomes transparent again. The switching time from light to dark is
about 0.0002 second. The switching time from dark to light may be set up within 0.1-0.9 second. The mask is equipped with 2 sets of photo-sensors in the Pro 400 and 4 sets of photo-sensors in the Maxpro 800 to sense arc light. In addition, the mask is also provided with an outer protection plate made of high polymer materials. The plate is wear- resistant and thermostable.
SPECIFICATIONS:
- Shell Type: Pro 400
- Filter Model: SK10
- View Colour: True Colour
- Filter Dimension: 110 x 90 mm
- View Area: 92 x 42mm
- Light Mode: Shade 4
- Light to Dark Speed: 0.3m/s
- Weld Mode: Variable Shade: 9 - 13
- Grind Mode: Yes
- IR / IV Protection: DIN15
- Sensors: 2
- Operating Temperature: -5ËšC to 55ËšC
- Optical Classification: 1/1/1/2
- Shade Control: External
- Power Supply: solar cell w/ replaceable battery
- Standards: ANSI Z87.1 / DIN / CE / CSA