Features:

• Adjustable sliding inserts to allow face-plate and mortise recesses for popular size door locks to be routed.
• Fully adjustable for lock face plate length up to 250mm.
• Quick and easy to set up using engraved lines for lock size and door sizes.
• Fast, clean & accurate results on doors even in hardwood.
• Engraved for 16mm and 19mm lock width and 22.5mm and 25.4mm face plate widths.
• Measuring required for other lock widths.
• Engraved on underside to allow set up for 35mm, 40mm, 44mm and 54mm door widths. 
• Deeper mortises can be achieved with a suitable size of auger bit.
• Plastic laminate body with aluminium clamping bar, with clamping range 30mm to 80mm.
• Includes a pair of setting blocks for specific lock widths and to aid door centring.
• The jig requires a plunge router with a 80mm plunge, fitted with a 30mm guide bush with 10mm spigot, 12mm diameter long reach cutter and two quick action clamps

Specifications:

Door thickness min.= 30 mm
Door thickness max.= 80 mm
Faceplate length min.= 30 mm
Faceplate langth max.= 250mm

Face Plate Dimension Engraved Widths
22.5 mm
25.4 mm (1 inch)

Mortise Dimension Engraved Widths
16 mm (5/8 inch)
19 mm (3/4 inch)

Includes:

2 x setting block