{"product_id":"autoglym-polar-wash-foaming-car-wash-2-5l-aurpws002-5-aurpws002-5","title":"AUTOGLYM Polar Wash Foaming Car Wash-2.5L AURPWS002.5","description":"\u003cp\u003eA safe and effective cleaner for home pressure washers.\u003c\/p\u003e\r\n\u003cp\u003ePolar Wash is a safe and effective cleaner that should be applied using a pressure washer with a foam gun after pre-washing with a snow foam such as Polar Blast. This impressive cleaner will cover your vehicle in a blanket of foam that makes light work of dirt, traffic film and road grime removal.\u003c\/p\u003e\r\n\u003cp\u003eHow to use this product\u003c\/p\u003e\r\n\u003col start=\"1\"\u003e\r\n\u003cli\u003eBefore you start, check that the bodywork and wheels are cool to the touch and out of direct sunlight.\u003c\/li\u003e\r\n\u003cli\u003eWe recommend a pre-wash with Polar Blast to gently loosen dirt. If not, rinse first with water to loosen heavy contamination.\u003c\/li\u003e\r\n\u003cli\u003ePolar Wash can be used at various dilutions depending on the density of foam desired. However, we would not recommend using a dilution stronger than 50:50. Adjust foam gun settings as required to increase or reduce foam. 250ml of mixed solution should be enough to cover an average sized car. \u003c\/li\u003e\r\n\u003cli\u003eSpray Polar Wash onto the vehicle, starting at the bottom, ensuring all exterior surfaces are covered, including glass and wheels.\u003c\/li\u003e\r\n\u003cli\u003eThe cleaner will begin to loosen dirt on all surfaces. For the most thorough clean we recommend agitating the foam with a sponge or wash mitt.\u003c\/li\u003e\r\n\u003cli\u003eRinse thoroughly from the bottom up and dry.\u003c\/li\u003e\r\n\u003c\/ol\u003e\r\n\u003cp\u003ePolar Wash is not suitable for use on soft top convertibles.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eTop Tip\u003c\/strong\u003e – Follow with Polar Seal for a protective, hydrophobic coating\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eFAQ's\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eWhat is Polar Wash?\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eIt is a shampoo designed specifically for use in a pressure washer. It is intended to be the wash element (second stage) of the three-stage Polar range process. It is preceded by the prewash – Polar Blast and followed by a coating - Polar Seal.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eHow is Polar Wash different from Pressure Wash?\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003ePolar Wash replaces Pressure Wash, our previous pressure washer shampoo. The formulation has been reformulated and is stronger than its predecessor.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eHow is Polar Wash different to Polar Blast?\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003ePolar Blast is a Pre-Wash product that aids the removal of heavy dirt from the paintwork. It gently loosens and softens contaminants and does not require agitation. Polar Wash is the next stage of the process – the shampoo. It has more cleaning power that can get to work on removing TFR once Polar Blast has removed the larger particles of contamination.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eIs Polar Wash pH neutral?\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eNo it isn’t. However it will not remove Extra Gloss Protection, Waxes or sealants; such as LifeShine.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eCan Polar Wash be used neat or does it need to be diluted?\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eYes it can be used neat. However we would recommend a 50:50 dilution rate for the best results. It is up to the user to find a dilution the best works for them.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eCan Polar Wash be added to the reservoir in my Jet Wash?\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eYes. However, it is worth highlighting that the level of foam will be dependent on the performance and flow rates of the pressure washer and water hardness. The 50:50 product\/water mix advised for a bottle foamer is also a good starting point for a reservoir.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eIs Polar Wash High Foaming?\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eYes, it is a high foaming product that allows the user to see where they have agitated the product to minimise chances of ‘missing a bit’. However, although this product has greater cleaning power, its foam does not have the density and cling time of our pre-wash product - Polar Blast.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eIs Polar Wash a touchless wash shampoo?\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eIt can perform a touchless clean on very lightly soiled and well maintained vehicles. However, for stubborn dirt and TFR we advise agitation with a wash mitt or sponge. \u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eDoes Polar Wash need to be used through a pressure washer? \u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003ePolar Wash has been designed specifically for use through a pressure washer. We would recommend our other shampoos for hand washing methods.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eIs a foaming lance required to use Polar Wash?\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eWe would strongly recommend the use of a foaming lance or foamer bottle in conjunction with a pressure washer to create the optimum foam levels.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eWhat are the usage instructions for Polar Wash?\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eSee 'How to use this product'.\u003c\/p\u003e","brand":"Autoglym","offers":[{"title":"Default Title","offer_id":48207030124779,"sku":"AURPWS002.5","price":49.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0828\/7374\/5643\/files\/autoglym-polar-wash-aurpws002-5-aurpws.jpg?v=1778030276","url":"https:\/\/vektools.com.au\/products\/autoglym-polar-wash-foaming-car-wash-2-5l-aurpws002-5-aurpws002-5","provider":"VEK TOOLS","version":"1.0","type":"link"}