Metabo 18V 5.5Ah Cordless Brushless 3pce Combo Kit

Metabo NFR 18 LTX 90 BL 612090840 18V Nailer Kit

Features:

Powerful cordless nailer with pneumatic impact technology for nails up to 90 mm length
Fast work progress thanks to fire sequence of two nails per second
Maximum freedom of movement when driving in nails without compressed air hose or cable
Economical, safe operation without gas cartridge and addition service effort
Efficient Brushless motor for up to 550 shots per battery pack charge (LiHD 4.0 Ah)
Selection possible between single shot mode and contact triggering for fast nailing in series
Tool-free adjustment of the driving-in depth for precise working
Blank shot protection protects from unnecessary wear and tear and increases the service life of the nailer
Energy-saving safety shutdown after 30 minutes of inactivity
Multi-position handle to protect the battery pack, as attachment point for tool safety equipment and to suspend the nailer
With metaBOX, the intelligent solution for transport and storage
Specifications:

Voltage: 18V
Nail Speed: 2/s
Magazine Capacity Nails: 47
Nail Strips Angle: 30-34º
Nail Length: 50mm - 90mm
Nail Diameter: 2.9mm - 3.3mm
Vibration: 3.7m/s2
Uncertainty of Measurements K: 1.5m/s2
Sound Pressure Level: 87dB(A)
Sound Power Level (LwA): 98dB(A)
Uncertainty of Measurements K: 3dB(A)
Weight: 4.1kg

Metabo 5.5Ah Battery 

Features:

LiHD battery packs for ultimate performance and extremely long application with minimal temperature generation
Ultra M technology: Intelligent battery management for long-lasting battery packs
Patented “AIR COOLED“ charging technology
Permanent Electronic Single Cell Protection (ESCP) when charging, for particularly long life
Processor-controlled charge and discharge management
Capacity display with almost no self-discharge
Specifications:

Battery pack voltage: 18V
Battery pack capacity: 5.5Ah

Metabo Battery Charger ASC55

Features:

• Monitored charging with micro controller
• Battery diagnosis
• Charge time approximately 30 minutes at 1.5 Ah
• "AIR COOLED" function
• For charging all Li-Power Compact, Li-Power Plus, Li-Power Extreme battery packs
• For charging all Li-Ion and LiHD slide-on battery packs (12 V - 36 V) with adapted battery pack charging current
• Charger switches to compensation charge: to conserve the capacity, the battery pack is charged for 1 second every 45 seconds with 2.5 ampere.
• "AIR COOLED" function: the patented principle is based on air-cooling the battery pack during the charging process. The battery packs are gently cooled down to the required charging temperature, and then during the charging process are constantly maintained at optimum temperature. With this principle, a higher tool life of the battery packs and up to 30% shorter total charging time can be achieved.
• "AIR COOLED" function: the patented principle is based on air-cooling the battery pack during the charging process. The battery packs are gently cooled down to the required charging temperature, and then during the charging process are constantly maintained at optimum temperature. With this principle, a higher tool life of the battery packs and up to 30% shorter total charging time can be achieved.

Specifications

• Mains voltage: 230 - 240V
• Mains frequency: 50 - 60Hz

Metabo SB 18 LTX BL I 602360850

Features:

Brushless hammer drill with maximum power for demanding applications
Hammer drill function for drilling in masonry
Selectable "impuls" mode for removal of stubborn screws and for spot-drilling on smooth surfaces
Precision Stop: electronic torque control with increased precision for precise, delicate working
Electronic safety shutdown: no kickback if the drill bit stops unexpectedly - for high user safety Integrated
LED work light with night light function for optimal brightness in the work area
With handy belt hook and bit case which can be fixed either on the right or left side
Specifications:

Voltage: 18V
Maximum Torque
Soft: 65Nm
Pulse: 65Nm
Hard: 130Nm
Adjustable Torque: 1-20Nm
Drill Diameter Capacity:
Masonry: 16mm
Steel: 13mm
Soft Wood: 68mm
No-Load Speed: 0-550rpm / 0-2000rpm
Maximum Impact Rate: 38000bpm
Chuck Capacity: 1.5mm - 13mm
Vibration:
Drilling in Metal: 2.6m/s²
Impact Drilling in Concrete: 16.5m/s²
Sound Pressure Level: 92dB(A)
Sound Power Level: 103dB(A)
Dimensions(L x W x H): 219mm x 83mm x 201mm
Weight(Skin): 1.8kg

Metabo KS 18 LTX 66 BL 611866850

Includes:

1 x Carbide circular saw blade (18 teeth)
1 x Parallel guide
1 x Hexagonal wrench
Features:

Aluminium base plate can be directly used on guide rails from Metabo and other manufacturers
Fast, precise cross cuts thanks to easy coupling with a Metabo cross cutting rail
Metabo brushless motor guarantee maximum power and enduring sawing
Automatic switching on/off of the connected vacuum cleaner thanks to CordlessControl. (available as accessory)
Sawdust ejection nozzle for any working position can be rotated and locked individually
Integrated LED work light for optimum illumination of the cutting line
0° position re-adjustable for highest cutting precision
Clearly visible cutting indicator for precise sawing after initial cut
Robust and durable thanks to aluminium die-cast saw housing
Handle with non-slip soft-grip surface for safe guidance
Extraction possibility by means of connecting an all-purpose vacuum cleaner (not included)