IMPORTANT: You cannot use regular Wet & Forget (blue) with the new Rapid Application hose fitting. It will NOT work as dilution rates are different.
Wet & Forget® has a unique combination of biodegradable selective surfactants for moss and mould removal on absolutely any exterior surface. When diluted with water and applied, it immediately attacks that unsightly moss and mould. Then Mother Nature takes over. The weathering process gently removes the decomposing growth away over time without damaging the surface it has infested.
Wet & Forget® is the safest, most effective way of removing moss and mould from ANY exterior surface.
Will not damage your roof in any way.
These 2 products are pH neutral, non acidic, non-caustic and contain no bleach!
Safe on all roof surfaces such as:
Terracotta Tile, Clay Tile, Concrete Tile, Fibrolite, Colour Steel and Polycarbonate
How much product will I need for a roof? (For the average 3 bedroom, single storey house)
2 x 5L Wet & Forget or 2 x 2L Rapid Application (you will get the same coverage from both products)
If you have lichen on your roof you will need 3 x 5L Wet & Forget or 3 x 2L Rapid Application (needs 2 applications to penetrate the lichen)
Helpful Hints:
You cannot use regular Wet & Forget® 5L (blue) with the Rapid Application® Sniper Nozzle. It will NOT work!
How to Remove Lichen on Roofs with either Wet & Forget® 5L Concentrate or Rapid Application®
Wet & Forget is safe to use on all tennis court surfaces.
Application: The best time to apply Wet & Forget is in the morning or late afternoon to avoid excess evaporation. The entire court must be sprayed for an effective kill to take place even if the surface looks clean, because the spores are still present and will re-contaminate any treated surface.
Coverage: We recommend that you use Wet & Forget Rapid Application as it is easy to apply. Just attach your hose and spray! Depending on the surface of your court you will need 4-6 x Wet & Forget Rapid Application to cover a full size court.
Surfaces:
Listed below are the best treatment methods for different surfaces.
On all surfaces you must sweep the court clean of all leaves, dirt etc. so that the active ingredient can penetrate directly into the spores.
Concrete, Rebound Ace and other hard surfaces (3-4 x RAPID APPLICATION). Thoroughly saturate the entire dry surface with Rapid Application.
Synthetic grass ,Clay or Loam surfaces (4-6 x RAPID APPLICATION). Apply to a damp (not wet) surface e.g. after a morning dew or after a light hosing. If the court is badly contaminated the mould will need to be loosened by brushing before the Rapid Application is applied. Please note if you can't see the fibres of the synthetic grass through the "mould crust" you will have to dislodge the crust manually before you apply Rapid Application.
Reaction Time: Wet & Forget Rapid Application contains no bleach, chlorine or heavy chemicals so it does take time for the infested surface to come clean. This depends on the type and intensity of the growth (anywhere between a few weeks for green growth to 6-12 months for black mould).
Benefits:
No bleach, No acid and is biodegradable No pressure cleaning, no wasting water! Kills the mould spores and helps prevent premature regrowth.
| Video |
|---|
