RAWLPLUG R-KEX-II 600mL Pure Epoxy Chemical Anchor Resin - R-KEX-II-600

RAWLPLUG R-KEX-II 600mL Pure Epoxy Chemical Anchor is a high-performance 3:1 epoxy bonded anchoring resin for structural fixings and post-installed reinforcing bars in concrete. Suitable for cracked and non-cracked concrete, including reinforced and unreinforced substrates, with approvals for demanding structural applications.

Features and benefits

• Pure epoxy bonded anchor with 3:1 resin system
• Approved for post-installed reinforcing bar connections and threaded-rod anchors, subject to the relevant design assessment
• Seismic performance approvals for categories C1 and C2
• Suitable for dry and wet concrete substrates, including underwater installations within approved conditions
• Extended working time assists deep embedment and positioning of steel components
• High performance at elevated temperatures
• Suitable for downward, horizontal and upward installation where permitted by the technical approval

Applications

• Structural steel and concrete connections
• Post-installed reinforcing bars and threaded rods
• Safety barriers, balustrades and cladding restraints
• Platforms, racking and machinery anchoring
• Road and bridge infrastructure

Specifications

• Brand: RAWLPLUG
• Model / SKU: R-KEX-II-600
• EAN: 5906675293721
• Resin type: Pure epoxy chemical anchor
• Mix ratio: 3:1
• Cartridge volume: 600mL
• Cartridge: Plastic dual-component cartridge
• Recommended dispensing gun: R-GUN-600-P (sold separately)
• Approved concrete grades: cracked and non-cracked C20/25 to C50/60
• European technical assessments include ETA-21/0244 and ETA-13/0585

Installation guidance

Drill to the diameter and depth specified by the approved fixing design. Clean the hole by blowing and brushing in the prescribed sequence. Fit the cartridge in a compatible 600mL 3:1 dispensing gun, attach the static mixer and discard initial resin until a consistent mix is achieved. Inject from the base of the hole, insert the stud or rebar with a twisting motion, and leave undisturbed for the required curing time before loading. Always follow the current product approval, load tables and installation instructions for the substrate and conditions.